YUCHENGTECH 4800W Wall Groove Cutting Machine Chaser 110V Wall Chaser Cutting Machine Electric Wall Chaser Grooving Cutting Machine Wall Grooving

Huanyu Electric Wall Chaser 1 time Molding Wall Groove Cutting Machine Infrared Sighting 4800W Cutting Width 40mm Depth 40mm Wall Chaser Concrete

4000W Wall Groove Cutting Machine Electric Brick and Granite Moorstone Wall Chaser Concrete Cutter Notcher Groover (with Vacuum Cleaner)

YUCHENGTECH 4800W Wall Groove Cutting Machine Chaser 110V Wall Chaser Cutting Machine Electric Wall Chaser Grooving Cutting Machine Wall Grooving

VEVOR Wall Chaser, 4800W Slotting Machine with Laser Guide 6500rpm

YUCHENGTECH 5800W Wall Groove Cutting Machine Chaser Electric Wall

Electric Wall Groove Cutting Machine Grooving Chaser 110V 4800W for Brick Concrete Slotting Groover Cutter Power Masonry Saw with 5Pcs 5.2Inch Saw

YUCHENGTECH 4800W Wall Groove Cutting Machine Chaser 110V Wall Chaser Cutting Machine Electric Wall Chaser Grooving Cutting Machine Wall Grooving

Wall Chaser, 4800W Electric Concrete Grooving Cutting Machine with 5 Saw Blades Wall Slotting Machine, Max Groove Depth and Width 1.61\" x 1.65\"

YUCHENGTECH 4800W Wall Groove Cutting Machine Chaser 110V Wall Chaser Cutting Machine Electric Wall Chaser Grooving Cutting Machine Wall Grooving

YUCHENGTECH 4800W Wall Chaser Concrete Cutter Wall Grooving Cutting Machine Chaser Electric Wall Chaser Cutting Machine Wall Grooving Cutter With

YUCHENGTECH 4800W Wall Groove Cutting Machine Chaser 110V Wall Chaser Cutting Machine Electric Wall Chaser Grooving Cutting Machine Wall Grooving

・1. D-type handle design : ergonomic design, comfortable grip does not slip, can meet different cutting posture, long time construction easy and convenient.
・2. Double-headed atomization dust removal : upgrade the double-headed atomization water spray design, fine water droplets and particles of dust fusion dust no longer drift around, cutting can see more clearly, improve operational safety factor.
・3. Adjustable cutting depth and angle : 0-2.8in (71mm) cutting depth can be freely adjusted, adjustable aluminum alloy shroud design, 0-90 ° multi-angle manual free adjustment, can be achieved from the wall to the ground 90 ° wall angle diversified cutting.
・4. Waterproof design : intelligent control system to reduce the body voltage, the whole body voltage does not exceed 12 volts, with water cutting safety without pressure, water immersion is not afraid of leakage.
・5. Application : More suitable for cutting scenarios with certain requirements on cutting depth, such as cutting door and window frames, electric cable boxes, stone cutting, etc. Suitable for hollow brick, concrete, red brick, steel, marble light weight brick and other multi-materials.
説明: Characteristics:
1. Power-off protection: In order to protect the safety of the operator, the machine will automatically power off when there is an accident,
and you need to press the switch again to start.
2. Fender design: Longer and wider fender design, reduce splash when cutting, and dump ash more cleanly.
3. Brushless pure copper motor: 4800W high-power motor, strong power and fast speed, smooth operation, high temperature resistance and no burn.
4. Torque strength upgrade: secondary high-temperature quenching gears, greater torque strength, slotting stronger power.
5. Thickened base plate: more stable operation, cutting fit base plate, slotting more accurate.
6. Three-stage gear design: more torque, higher efficiency.
7. Lightweight design, easy to achieve one-hand operation.
Note:
1. When connecting into the water pipe slotting, the machine cutting blade should be downward to avoid water entering the machine body.
When cleaning the machine, avoid water entering the machine through the vent.
2. When using vacuum cleaner to slot, when the bottom plate is adjusted to the bottom position, the front protective cover is completely close to the wall or ground,
so that the vacuum effect is better.
3. When the operation of the machine slows down, you can lift the machine to idle for 1 minute and then continue to operate
to avoid overloading and burning the machine.
4. About leakage protection: When adding water to the operation, pay attention to the motor not to be lower than the cutting blade position,
the motor and portable switch at the water will not leak.
5. Regularly check the carbon brush wear, when the spark is larger, timely replacement of carbon brushes, so as not to affect the life of the machine.
Parameters:
Voltage: 110V
Frequency: 60Hz
Maximum power: 4800W
Rated power: 2200W
Rated speed: 5500r/min
Slot width: 3mm
Notching depth: 71mm
Power cord length: 3m
Machine net weight: 5kg
Saw blade parameters: 190 * 22.2 * 3mm
Body size: 43 * 24cm
Packaging size: 48 * 31 * 20cm
カテゴリー: 鋸
メーカー: YUCHENGTECH
ブランド: YUCHENGTECH
高さ: 49.5 センチ
幅: 38.0 センチ
奥行: 21.2 センチ
重量: 7.8 Kg
1. 弊店の商品は【全国送料無料】になります。 2. 海外倉庫から国内に取り寄せになります。（商品到着まで2-3週間程度お時間頂いております。）3. ごく稀に税関審査の際の開封により外箱（パッケージ）に傷がある場合がございますが、商品自体の品質には問題ありません。 4．商品が国内に到着し国内倉庫にて一度検品させて頂きその後発送させて頂きます。5.商品が電波法上の技術基準に適合する必要がある無線機器の場合につきまして、当店の商品は並行輸入品でございます。電波法上の技術基準に適合いたしません。日本国内で使用する場合には電波法に違反するおそれがあります。ご購入、ご使用には十分ご注意ください。